ngHobbies
BL-CTRL V1.2 SPEED CONTROLLER EXTRA SWITCH
The following items are included in this kit:,
This BL-Ctrl programmed for the Hexa nad Optokopter opertion. Each ...ngHobbies
SPIRONET 5.8GHZ RH V2 ANTENNA SET
,
This is the SpiroNET 5.8GHz circular polarized antenna from ImmersionRC ...ngHobbies
900 MHZ 3 DBI "RUBBER DUCK"ANTENNA
| Frequency | 902-928 MHz |
| Gain | 3 dBi |
| Horizontal Beam Width | 360 degrees |
| Impedance | 50 Ohm |
| Max. Input Power | 50 Watts |
| VSWR | < 2.0 |
| Weight | < 1.6oz (45g) |
| Dimensions | 8.62" x 0.66" (219 x 16.7 mm) |
| Finish | Matte Black |
| Connector | SMA-Male |
| Polarization | Vertical |
| Operating Temperature | -40° C to to 60° C (-40° F to 140° F) |
| Flame rating | UL 94HB |
| RoHS Compliant | Yes |
Specifications:, Datasheet:, Click Here,
900MHz ISM Band Cellular Band Applications 900MHz Digital Spread Spectrum ...ngHobbies
LOCOSYS USB GPS EVALUATION BOARD
,
LS20033 series products are complete GPS smart antenna receivers, including ...ngHobbies
SPEKTRUM SATELLITE DIVERSITY CONTROLLER
| Connector 1 | Connection to the flight controller |
| Connector 2-5 | Connection to satellite receivers |
Binding Instructions:, As any spektrum receiver, the diversity board and the satellite receivers connected to it will have to be bound to your spektrum transmitter. To enter the binding mode, you will need to hold the binding button pressed while powering on the circuit. All attached satellite recievers will be blinking fast during binding mode. The LED on the diversity receiver board will blink briefly 3-6 times, then it will turn off for a few seconds after which it will start flashing again - waiting for the RC signal. At this point follow the instructions of your RC transmitter to turn it on in binding mode. When the RC binding signal is detected, the satellite receivers will follow their routine of binding and blink slower. When the binding is complete, the LED's on the satellite recievers will stay on and on the diversity board will turn off., The package contains:, 1 x MK Diversity Controller, Documentation:, Additional documentation translated by google:, Click here,
This litte diversity controller has been designed to connect 4 ...ngHobbies
LOCOSYS 10HZ GPS MODULE
| Weight | 7 grams (Including antenna) |
| Width | 16mm |
| Length | 34mm |
| Height | 7mm |
| Cable | Approx 30mm with 5 pin or standard connector. |
Features:, 10Hz max update rate, Dimensions:, Datasheet:, Datasheet,
LS20033 series products are complete GPS smart antenna receivers, including ...ngHobbies
900 MHZ 5 DBI "RUBBER DUCK"ANTENNA
,
900MHz ISM BandCellular Band Applications 900MHz Digital Spread Spectrum Radios ...ngHobbies
GUARDIAN 2D/3D INERTIAL STABILIZER
Documentation:,
Based on Eagle Tree's proven inertial stabilization technology, the Guardian ...ngHobbies
XBEE INTERFACE ADAPTER PAIR
| Industrial operating temperature range | -40 ° C to +85 ° C. |
Specifications of the USB module:, pre installed FTDI USB to serial converter chip, no driver is requored for most Windows systems., The following items are included in this kit:, 1 x USB Interface adaptor, Important:, xBee modules are NOT included in this kit., Manual:,
This interface pair has been developed by New Generation Hobbies ...ngHobbies
10 MW 2.4GHZ LIGHTWEIGHT TRANSMITTER
,
This is a 10mW transmitter for the GP707 receiver. It ...ngHobbies
GOPRO HERO 3 FPV IMMERSIONRC CABLE
feed from a GoPro 3 Hero HD camera to an Immersion RC video transmitter. The USB connector fits the GoPro Hero 3 cameras AV plug and the 5 pin Molex type connector has been provided to be plug and play with the video 2.4GHz and 5.8GHz transmitters designed and manufactured by Immersion RC. The 5 pin Molex connector has the following connections:, Brown - Ground connection,
This cable offers FPV audio and video Orange - Video ...ngHobbies
GOPRO HERO 3 RIGHT ANGLE FPV IMMERSIONRC CABLE
feed from a GoPro 3 Hero HD camera to an Immersion RC video transmitter. The right angle cable and the USB connector fits the GoPro Hero 3 cameras AV plug and the 5 pin Molex type connector has been provided to be plug and play with the video 2.4GHz and 5.8GHz transmitters designed and manufactured by Immersion RC. The 5 pin Molex connector has the following connections:, Brown - Ground connection,
This cable offers FPV audio and video Orange - Video ...ngHobbies
GOPRO HERO 3 FPV VIDEO CABLE FEMALE
feed from a GoPro 3 HD camera to an FPV video transmitter. The USB connector fits the GoPro Hero 3 cameras AV plug and the female servo type connector has the following connections:, Yellow (Orange) - Video out,
This cable offers FPV audio and video Red - Audio ...ngHobbies
GOPRO HERO 3 FPV VIDEO CABLE
feed from a GoPro 3 HD camera to an FPV video transmitter. The USB connector fits the GoPro Hero 3 cameras AV plug and the servo type connector has the following connections:, Yellow (Orange) - Video out,
This cable offers FPV audio and video Red - Audio ...